Electric system overview

Installation

Applications

 

 

 Electric system overview


Heating mat example


Heating element example

 

Electric under floor heating systems are a very efficient way to heat just about any space, from flats to sports halls, we offer a cost effective, unobtrusive, and safe solution to your heating needs.

Heating Mats and Cables
Electric under floor heating mats are ideal for:

  • refurbishment projects on top of existing floors
  • new-build projects embedded in the floor screed
  • ceramic tiles, slate or a stone floor covering
  • carpeted floors
  • floating hardwood floors
  • wood laminate flooring
  • wooden parquet flooring
  • vinyl or linoleum floor covering
  • Dalsouple rubber floors

Heating Elements
Electric under floor heating elements are ideal for:

  • floating hardwood floors
  • wood laminate flooring
  • wooden parquet floors
  • fitting directly onto the joists before applying a chipboard
    or plywood floor surface
  • fitting directly onto a chipboard floor and then covering
    with up to 18mm thick ply
  • carpet, ceramic tiles, Dalsouple rubber or vinyl flooring
    on top of an 18mm thick ply

All our systems are thermostatically controlled and fully insulated to ensure optimum efficiency.

Note: this is conducted heat, no holes or grills which might attract dirt or be a hazard are used in the system.

By using our design only service you can either install the system yourself or appoint your own COMPETENT builder to do the work for you. In this case we are pleased to offer help and advice on installation techniques.

We use materials from the biggest names in this field. Tried tested and proven over many years.

 

 


 Installation

 


Electric underfloor heating systems are  ideal for both new build and refurbishment projects.

  • Can be installed onto an existing timber sub-floor.
  • Can be installed within the thickness of the tile adhesives - no significant height to the floor level and no need to reduce door heights, raise skirting boards etc
  • Can be installed directly onto existing tiled floors - no need to take up old tiles unless they are unsound
  • Use heating mats with power ratings - 100W/m2 to 200W/m2
  • Cables rated 11W/m are also suitable for refurbishment project work
  • It can be installed onto an existing floor structure - either a concrete sub-floor or a timber sub-floor.

The ultra thin heating cables cab be installed within the thickness of the tile adhesive and therefore adds no significant height to the floor level. Consequently there should be no requirement to reduce door heights, raise skirting boards etc.

 

 

 


 Applications

 

 

New Build and Re-furbishment projects:

  • Private houses
  • Public buildings
  • Sports halls
  • Business premises
  • Conservatories
  • Barn conversions
  • Education facilities
  • Medical and elderly care centres

In fact just about anywhere that a safe, reliable,quiet, efficient and cost effective heating solution is required.